KLIR-RM1KIT RECESS MOUNT IR KIT

The KLIR-RM1KIT is an Infra Red (IR) signal transport device. It is designed to extend the communication between an IR remote control and respective AV equipment e.g. Blu-ray player, set-top box, amplifier etc, which can be in a different room or hidden location. The IR receiver has a recess mount for discreet installation in walls, ceilings or cupboard doors.

Kinetik IR components work with all Sky HD boxes.

DOWNLOADS/LINKS

FULL SIZE IMAGES
RANGE BROCHURE
TECHNICAL
INSTRUCTION MANUAL
SUPPORT

WOULD YOU LIKE TO LEAVE FEEDBACK ABOUT OUR SITE OR PRODUCTS?

CLICK HERE

SPECIFICATIONS

Model Number: KLIR-RM1KIT
Box Contents: 1x recess mount IR receiver, 1x connection block, 2x dual IR emitters, 2x jack to jack cables, 4x emitter covers
Included accessories: 2x receiver bezels, 4x replacement emitter sticky pads, 4x replacement emitter cover adhesive tabs, 1x instruction manual
IR Frequency Bandwidth: 38kHz +/-2kHz
Control Range: 15m (6m in direct sunlight)
Reception Angle: +/-45 degrees
Connection Block Inputs: 1x 12V DC
1x 3.5mm jack IR
1x Phoenix connector (12V DC / ground / IR
Connection Block Outputs: 4x 3.5mm jack IR
Power (Supplied Adapter): 12V DC, 660mA
Power Consumption (Stand By): 13mA
Power (In Use): 40mA (approximate)*
Weight: 650g
Receiver Dimensions
(H x W x D):
14.8 x 14.8 x 51mm
Connection Block Dimensions
(H x W x D):
23 x 70.5 x 55.5mm
Emitter Dimensions
(H x W x D):
7 x 10 x 14mm
(cable length 3m)
Power Supply Dimensions
(H x W x D):
57 x 49 x 64mm (UK)
57 x 45 x 77.5mm (Europe)
   
* Power consumption can vary with system size, combined IR equipment and signal variations.